Le Blog de Inthe et Mould

J-389



Divers
Gate position should be in the most thick and Bathtub Moulding
The mould in forming part of the need for different concerns
The shrinkage rate will in addition change the mould
A reasonable process arrangement furniture mould
Matched against each other on the movable mould
The shunt materials and extend the cooling


The mould in forming part of the need for different concerns
To sum way up, furniture mould color injection moulding technology after a lot of development, but gradually be attention and application lately, because of its produce finished products to the employment of the environment has the top notch adaptability, high production efficiency, while doing so for different actual requirements in order to meet, so is widely used progressively, in the automotive industry and other fields use a good economic benefit, is a technique of great development potential.

The mould in forming part of the need for different concerns, the first two of concave and convex chamfer should carefully design of injection moulds, assure to suit when docking, demoulding mechanism design concurrently the need for secondary treatment after stripping work can carry on, for different injection methods and different detailed distinction,

in up and down rotary injection machine will items after stripping out completes associated assignments, and unable to take advantage of the injection machine ejector demoulding need a stripping utilizing hydraulic equipment. General is always to increase the surface contact between the 2 main kinds of raw materials to boost robustness,

here can be solidcomould within products to design some more small groove along with a convex slot Mosaic and suture, which reached the reason for increase the contact area of two kinds of material, when making injection can much better improve use strength and service life of the product, enhance the practicability.The look of the product structure and shape needs to be considered from the purpose and technique product, and the size and internal structure of the product are studied carefully. rotary mould double speed injection mould.

Learn More:(cliquez ici pour suivre le lien)

Message déposé le 06.07.2018 à 05:21 - Commentaires (0)




 Ajouter un commentaire

Votre nom


Votre e-mail


Votre commentaire


 Livre d'Or

 Contact



Tous les messages
Gate position should be in the most thick and Bathtub Moulding
The mould in forming part of the need for different concerns
The shrinkage rate will in addition change the mould
A reasonable process arrangement furniture mould
Matched against each other on the movable mould
The shunt materials and extend the cooling


Créez votre blog sur Blog-grossesse.com